When installing a new B200 M3 server, it will either fail discovery at 56% or service profile association at 39% with the below:
service profile association at 39%
Slot Status: Equipped
Equipped Conn Path: A,B
Equipped Conn Status: A,B
Equipped Managing Instance: B
Availability: Unavailable
Admin State: In Service
Overall Status: Config Failure
Oper Qualifier: N/A
Discovery: Complete
Current Task: Waiting for BIOS POST completion from CIMC on server 1/4(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BiosPostCompletion)
Check Point: Discovered
Conditions:
B200 M3 with E5-2600 V2 series CPU which begins support in UCS 2.1.3a.
UCS infrastructure running 2.1.3a
For service profile association failing at 39%
CIMC==2.1.3a
Bios==2.1.1a
For Discovery failing at 56%L
CIMC==2.1.1e
BIOS==2.1.1a
Workaround:
Correct firmware version for blade to supported version for all components.
Ref:
BugId CSCul20788
Thanks. I ran into this today. Client was running 2.1.1a and added such blades with a new chassis. We'll be upgrading to 2.2.1d.
ReplyDeleteconfirmed it is sloved on 2.2.1c.
ReplyDeleteshould read throungh the upgrade release note and firmware upgrade guide which contains some critical issues may appear on the upgrade. it is very helpful to prepre the contingency plan..^ ^