Cisco Unified Computing System Overview
The Cisco Unified Computing System™ (Cisco UCS®) is a next-generation data center platform that unites compute, networking, storage access, and virtualization resources in a cohesive system designed to reduce total cost of ownership (TCO) and increase business agility. The system integrates a low-latency, lossless 10 Gigabit Ethernet unified network fabric with enterprise-class blade and rack x86-architecture servers. The system is an integrated, scalable, multichassis platform in which all resources participate in a unified management domain.
Product Overview
A Cisco® innovation, the Cisco UCS Virtual Interface Card (VIC) 1225 (Figure 1) is a dual-port Enhanced Small Form-Factor Pluggable (SFP+) 10 Gigabit Ethernet and Fibre Channel over Ethernet (FCoE)-capable PCI Express (PCIe) card designed exclusively for Cisco UCS C-Series Rack Servers. With its half-height design, the card preserves full-height slots in servers for third-party adapters certified by Cisco. It incorporates next-generation converged network adapter (CNA) technology from Cisco, providing investment protection for future feature releases. The card enables a policy-based, stateless, agile server infrastructure that can present up to 256 PCIe standards-compliant interfaces to the host that can be dynamically configured as either network interface cards (NICs) or host bus adapters (HBAs). In addition, the Cisco UCS VIC 1225 supports Cisco Data Center Virtual Machine Fabric Extender (VM-FEX) technology, which extends the Cisco UCS fabric interconnect ports to virtual machines, simplifying server virtualization deployment.
Figure 1. Cisco UCS VIC 1225
Features and Benefits
Stateless and agile: The personality of the card is determined dynamically at boot time using the service profile associated with the server. The number, type (NIC or HBA), identity (MAC address and World Wide Name [WWN]), failover policy, bandwidth, and quality-of-service (QoS) policies of the PCIe interfaces are all determined using the service profile. The capability to define, create, and use interfaces on demand provides a stateless and agile server infrastructure (Figure 2).
Figure 2. Virtual Device Support on the Cisco UCS VIC 1225
Network interface virtualization: Each PCIe interface created on the VIC is associated with an interface on the Cisco UCS fabric interconnect, providing complete network separation for each virtual cable between a PCIe device on the VIC and the interface on the fabric interconnect (Figure 3).
Figure 3. Cisco UCS VIC 1225 Architecture
Cisco SingleConnect Technology
Cisco® SingleConnect technology provides an exceptionally easy, intelligent, and efficient way to connect and manage computing in the data center. Cisco SingleConnect technology is an exclusive Cisco innovation that dramatically simplifies the way that data centers connect to:
● Rack and blade servers
● Physical servers and virtual machines
● LAN, SAN, and management networks
The solution addresses the challenges of today’s data center, and the result is a simple, intelligent, and efficient fabric:
● Easy: Cisco SingleConnect technology provides a “wire once and walk away” solution that eliminates traditional manual, time-consuming, error-prone processes and instead makes connecting servers to the Cisco Unified Computing System™ (Cisco UCS®) fast and easy.
● Intelligent: the technology is intelligent because it uses a zero-touch model to allocate I/O connectivity (LAN, SAN, and management) across any type of server: physical rack and blade servers and virtual machines. The network intelligence helps Cisco UCS adapt to the needs of applications. Rather than limiting applications to specific servers, Cisco UCS makes it easy to run any workload on any server.
● Efficient: the technology is highly efficient because LAN, SAN, and management connections are shared over a single network, increasing utilization while reducing the number of moving parts compared to traditional approaches with multiple networks.
Cisco SingleConnect technology is implemented with an end-to-end system I/O architecture that uses Cisco Unified Fabric and Cisco Fabric Extender Technology (FEX Technology) to connect every Cisco UCS component with a single network and a single network layer. As customers expect from Cisco, the Cisco UCS I/O architecture is based on open standards and is reliable, available, and secure.
Cisco Data Center VM-FEX Technology: Cisco Data Center VM-FEX technology extends fabric interconnect ports directly to virtual machines, eliminating software-based switching in the hypervisor. Cisco Data Center VM-FEX technology collapses virtual and physical networking infrastructure into a single infrastructure that is fully aware of the virtual machines’ locations and networking policies (Figure 4). Cisco Data Center VM-FEX technology is implemented by Cisco VICs with a pre-standard implementation of IEEE 802.1BR Port Extender.
Figure 4. Cisco Data Center VM-FEX with Cisco UCS VIC 1225
Table 1 summarizes the main features and benefits of the Cisco UCS VIC 1225.
Table 1. Features and Benefits
Feature
|
Benefit
|
x16 PCIe generation-2 interfaces
|
Delivers greater throughput
|
2 x 10-Gbps unified I/O
|
● Delivers 20 Gbps to the server
● Helps reduce TCO by consolidating the overall number of NICs, HBAs, cables, and switches because LAN and SAN traffic run over the same adapter card and fabric
|
Up to 256 dynamic virtual adapters and interfaces
|
● Creates fully functional unique and independent PCIe adapters and interfaces (NICs or HBAs) without requiring single-root I/O virtualization (SR-IOV) support from OSs or hypervisors
● Allows these virtual interfaces and adapters to be configured and operated independently, just like physical interfaces and adapters
● Creates a highly flexible I/O environment needing only one card for all I/O configurations
Note: Cisco UCS VIC 1225 hardware is SR-IOV capable, and you can enable SR-IOV after SR-IOV is broadly supported by the popular operating systems. Please refer to UCS Manager configuration limits for your specific OS and environment in the configuration guide.
|
Cisco SingleConnect technology
|
A single unified network - the same network brings LAN, SAN, and management connectivity to each server
|
Cisco Data Center VM-FEX technology
|
● Unifies virtual and physical networking in a single infrastructure
● Provides virtual machine visibility from the physical network and a consistent network operating model for physical and virtual servers
● Enables configurations and policies to follow the virtual machine during virtual machine migration
● Provides a pre-standard implementation of the IEEE 802.1BR Port Extender standard
|
Centralized management
|
Enables the card to be centrally managed and configured by Cisco UCS Manager
|
Network architecture
|
Provides a redundant path to the fabric interconnect using hardware-based fabric failover
|
More than 600,000 I/O operations per second (IOPS)
|
Provides high I/O performance for demanding applications
|
Support for lossless Ethernet
|
Uses Priority Flow Control (PFC) to enable FCoE as part of the Cisco unified fabric
|
Broad OS and hypervisor support
|
Supports customer requirements for Microsoft Windows, Red Hat Enterprise Linux, SUSE Linux, VMwarevSphere, and Citrix XenServer
|
Product Specifications
Table 2 lists the specifications for the Cisco UCS VIC 1225.
Table 2. Product Specifications
Item
|
Specifications
|
Standards
|
● 10 Gigabit Ethernet
● IEEE 802.3ae
● IEEE 802.3x
● IEEE 802.1q VLAN
● IEEE 802.1p
● IEEE 802.1Qaz
● IEEE 802.1Qbb
● Pre-standard IEEE 802.1BR
● Jumbo frames up to 9 KB
● Fibre Channel Protocol (FCP)
● Small Computer System Interface (SCSI)-FCP
● T11 FCoE
|
Components
|
Cisco UCS custom application-specific integrated circuit (ASIC)
|
Ports
|
2 x 10-Gbps FCoE SFP+ ports
|
Connectivity
|
PCIe 2.0 x16 form factor
|
Performance
|
10-Gbps line rate per port
|
Management
|
Cisco UCS Manager Release 2.0 (2) and higher
|
Number of interfaces
|
256 virtual interfaces (approximately 8 are reserved for internal use; other factors such as the OS and
hypervisor may limit this number further)
|
Physical dimensions
|
Length = 6.6 in (16.76 cm)
Width = 2.5 in. (6.35 cm)
|
Typical power
|
12 watts (W)
|
System Requirements
The Cisco UCS VIC 1225 is designed for use only on Cisco UCS C-Series Rack Servers. Cisco UCS VIC 1225 is supported on Cisco UCS C260 M2, C460 M2, C220 M3, C240 M3, C22 M3, C24 M3, C220 M4, C240 M4, and C460 M4 rack servers. One or more Cisco UCS VIC 1225 cards are supported on these servers depending on the slot configuration. See the server configuration guide for details.
UCSC-PCIE-C10T-02 Cisco VIC 1225T Dual Port 10GBaseT CNA
Half
No comments:
Post a Comment